This article mainly introduces:

Kuwait hydraulic cylinder,tailplate hydraulic cylinder manufacturer,tailplate hydraulic cylinder

(Kuwait tailplate hydraulic cylinder,produced by Hengyu Group）

tailplate hydraulic cylinder are widely used in Kuwait，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed tailplate hydraulic cylinder for customers from Kuwait.

Introduction to tailplate hydraulic cylinder:

The commonly used buffer structure of the tailplate hydraulic cylinder is composed of a piston boss and a tailplate hydraulic cylinder head groove. When the piston moves close to the tailplate hydraulic cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

The advantages and disadvantages of the tailplate hydraulic cylinder: the surface of the tailplate hydraulic cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the tailplate hydraulic cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

tailplate hydraulic cylinder body inspection: The inner surface of the tailplate hydraulic cylinder and the piston seal are the main factors causing the leakage in the tailplate hydraulic cylinder, if the tailplate hydraulic cylinder has a longitudinal tensile mark, even if the new piston seal is replaced, it can not effectively eliminate the fault, the inner surface of the tailplate hydraulic cylinder mainly checks whether the dimensional tolerance and shape and position tolerance meet the technical requirements, there is no longitudinal tensile mark, and measures the depth of the longitudinal tensile mark, in order to take the corresponding solution.

The quality of the tailplate hydraulic cylinder can not be ignored in the purchase of the tailplate hydraulic cylinder. The tailplate hydraulic cylinder is the main component of the tailplate hydraulic cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. tailplate hydraulic cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of tailplate hydraulic cylinder is deep hole processing, which has always troubled the processing personnel.

Answers to some questions about tailplate hydraulic cylinder:

Why the cylinder cannot operate normally after the explosion-proof valve is installed?
The pipeline explosion-proof valve is specially designed to prevent pipeline damage and free fall of the cylinder, so there must be back pressure to open. If there is no oil return pressure, or the oil return pressure is too small, and can not adjust the oil return pressure, such a system with explosion-proof valves is more troublesome, it is recommended to add a one-way throttle valve between the cylinder and the tank to establish back pressure. If you understand the explosion-proof valve, you can also try to adjust the opening of the valve (that is, the flow of the regulating valve), and adjust the opening to help the valve to open.

What is a two-way hydraulic cylinder?
Bidirectional hydraulic cylinder definition: The bidirectional hydraulic cylinder uses the oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil. The two-way cylinder has at least two oil ports, which are used to connect the hydraulic tubing, and control the extension and retraction of the cylinder by pressing.