This article mainly introduces:

Kuwait hydraulic cylinder,retractable cylinder manufacturer,retractable cylinder

(Kuwait retractable cylinder,produced by Hengyu Hydraulic Cylinder Factory）

retractable cylinder are widely used in Kuwait，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed retractable cylinder for customers from Kuwait.

Introduction to retractable cylinder:

The retractable cylinder is not the same as the retractable cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the retractable cylinder can not be used as a high-power power component, but the retractable cylinder can be used as a relatively large power component, or the retractable cylinder system can be used.

The pressure, temperature, medium and speed of different types of seals are not the same, water-ethylene glycol medium (HFC) can not be sealed with polyurethane, it can only use rubber seal; When the retractable cylinder is running fast, it must be sealed with slip ring, such as Sterseal, Glairing, GD1000K, TDI, etc., when the running speed is slow, Yx, U, V combination seals can be used; Fluorine rubber seal is used in high temperature and high pressure environment; When the running speed is fast, the buffer sleeve and buffer valve must be considered.

Do not regularly check the damage of the chrome layer of the retractable cylinder: completely extend the retractable cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the retractable cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the retractable cylinder seal. Welding slag is strictly prohibited on the surface of the retractable cylinder.

retractable cylinder piston rod material introduction: In general, we use 45 steel to produce retractable cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Answers to some questions about retractable cylinder:

What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.

Slide weight 35 kg exit stroke 55mm, is it suitable to use 40 cylinder diameter cylinder?
The maximum output force of the 40-bore hydraulic cylinder can reach 2 tons, and whether it can be used depends on the use scenario. In addition, the problem of mechanism stuck has nothing to do with the size of the power source, and reasonable structural design and good machining and assembly accuracy are the key.